Connecting to the Power Supply
The device receives power from a standard alternating current (AC) electrical outlet. The connection is made using the supplied AC power cord.
Power Specifications
|
Physical Specification |
Value |
|---|---|
|
Input Voltage |
Single universal AC power supply 100 to 240V |
|
AC Input Frequency |
50 to 60 Hz |
|
AC Input Current |
0.8A |
|
Max. Power Consumption |
20W |
| ● | The device must be connected to a socket-outlet providing a protective earthing connection. |
| ● | Use only the AC power cord that is supplied with the device. |
ご注意
本製品に添付の電源ケーブルは、Mediant 500 E-SBC に専用設計されているため、汎用性がありません. 本電源ケーブルを他の機器に使用されないよう、ご注意ください.
| ➢ | To connect the device to the power supply: |
| 1. | Connect the line socket of the AC power cord (supplied) to the device's AC power socket (labeled 100-240V~50-60 Hz 0.8A), located on the rear panel. |
Connecting to the Power Supply
| 2. | Connect the plug at the other end of the AC power cord to a standard electrical outlet. |
| 3. | Press the power switch to on (I) position so that the device receives power; the POWER LED on the front panel is lit green (for more information, see Power LED). |